Cart
-
×
Biometric School Time Attendance System with SMS 1 × KSh 75,000.00
Subtotal: KSh 75,000.00
KSh 300.00
Wired push-to-exit release switch for compatible access-control doors and alarm circuits.
The current price is KSh 300. This white push-to-exit switch provides a wired release signal for compatible access-control doors and alarm circuits.
A push-to-exit button is installed inside a secured doorway. Pressing it sends a signal to the access controller or power supply so the connected lock can release for exit.
The switch can form part of a system using a card reader, fingerprint terminal, magnetic lock, electric strike or electric bolt. Compatibility depends on the controller and wiring arrangement.
The listed model provides normally open, normally closed and common contacts. An installer selects the correct terminals according to the lock, controller and required release behaviour.
For a magnetic-lock system, the button is commonly wired through a suitable access-control power supply or controller. The complete installation must also provide safe emergency exit.
The stated dimensions are 86 × 86 × 20mm. Check the mounting surface, cable entry and back-box requirements before installation.
The white housing is listed as fireproof plastic and weighs approximately 0.1kg. Install it in a suitable indoor location protected from damage and moisture.
The specification lists a mechanical service life of up to 500,000 operations. Actual life depends on installation quality, environment and frequency of use.
The existing product information shows differing electrical ratings, so confirm the marking on the supplied switch before connecting a load. A qualified installer should avoid switching a lock directly if its demand exceeds the contact rating.
This model requires physical pressure to operate. A no-touch exit sensor detects a hand without contact and may be preferred in high-traffic or hygiene-sensitive locations.
Buy the access-control push exit button from Patsec Security Store at Accra Road, White Angle House, first floor, shop 76, Nairobi. Provide the lock and controller details for a wiring compatibility check.