Asenware 2 Zone Conventional Fire Alarm Panel

Description

Asenware 2 Zone Fire Alarm Panel Price in Kenya

The current sale price is KSh 13,500, reduced from KSh 14,000. The Asenware AW-CFP2166-2 is a two-zone conventional fire alarm control panel for small buildings such as shops, clinics, small offices, schools and homes.

How a Conventional Fire Panel Works

Smoke detectors, heat detectors and manual call points are wired on zone circuits. When a device activates, the panel shows which zone is in alarm and sounds the sounders and strobes.

Specifications

• Model: AW-CFP2166-2
• Zones: 2 detector circuits
• Sounder outputs: 2
• Mains: 110V or 240V AC
• Internal supply: 27.2V DC, 500mA total output
• Batteries: 2 × 12V 2Ah (24V)
• End-of-line resistor: 6.8kΩ
• Size: 320 × 231 × 90mm, about 5kg (6.8kg with batteries)

Controls and Outputs

Reset, Silence, Evacuate and LED Test buttons, two-level access by key, and a disable button for each zone. Fire, fire-routing and fault outputs can be set as dry relay or wet (powered) outputs.

Battery Protection and GSM

If the batteries drop below 21V during a long outage, they are cut off to prevent damage until mains returns. An optional GSM module sends SMS alerts during a fire.

Build the System

Add Asenware smoke detectors, heat detectors for kitchens, manual call points at exits and sounder strobes. Wire with fire-resistant cable and fit Yuasa 12V 2.3Ah batteries. For larger buildings, see the Asenware 4 zone panel.

Where to Buy a Fire Alarm Panel in Nairobi

Buy the Asenware 2 zone fire alarm panel from Patsec Security Store at Accra Road, White Angle House, first floor, shop 76, Nairobi. We supply and install complete fire alarm systems. Call 0714 847183. Prices exclude VAT.