125kHz RFID Proximity Cards – Price in Kenya

Description

• Frequency: 125kHz low-frequency RFID
• Standard: EM4100
• Material: PVC plastic card
• Read-only card; it cannot be rewritten or used to copy another card
• Typical reading distance: 5–12 mm, depending on the reader

RFID Cards Price in Kenya

These 125kHz RFID cards cost KSh 50 per card. They are suitable for adding or replacing cards in compatible door access and time-attendance systems. Contact Patsec Security Store to confirm availability for the quantity you need.

125kHz RFID Cards for Access Control

These EM4100 RFID cards provide a simple contactless credential for compatible access-control systems. Each card carries a read-only identification number that a supported reader uses to recognise an authorised card.

RFID Proximity Cards for Door Access and Time Attendance

Use these proximity cards with compatible door entry, staff attendance and identification systems. Their PVC card format is suitable for carrying in a wallet or using as a staff identification card.

Which Readers Work with 125kHz RFID Cards?

These cards work only with 125kHz RFID or ID-card readers that support the EM4100 standard. They do not work with 13.56MHz NFC or MIFARE readers. Check the frequency and supported card standard on your reader before ordering, or ask your installer to confirm compatibility.

Are 125kHz RFID Cards the Same as NFC Cards?

No. NFC cards and tags normally operate at 13.56MHz, while this product is a 125kHz low-frequency RFID proximity card. Choose this card only when your access-control or attendance reader supports 125kHz EM4100 credentials.

RFID Card Price Per Card and Bulk Orders

The current sale price is KSh 50 per card, reduced from KSh 70. For staff badges, apartments or multi-door sites, confirm the quantity required and whether each card must be enrolled by an installer.

RFID Cards vs RFID Key Fobs

Cards fit easily in wallets and can carry printed identification, while key fobs attach to a key ring. Both must use the same 125kHz EM4100 format supported by the reader.

Can These RFID Cards Be Programmed?

The card carries a fixed read-only identifier. It can be enrolled as an authorised credential in a compatible access-control or attendance system, but its stored identifier cannot be rewritten.

RFID Card Reading Distance

The stated reading distance is approximately 5–12mm, depending on the reader and installation. Hold the card close and flat against the reader for reliable detection.

Where to Buy RFID Cards in Nairobi, Kenya

Buy 125kHz RFID access cards from Patsec Security Store at Accra Road, White Angle House, first floor, shop 76, Nairobi. Delivery is available within Nairobi. Confirm your reader frequency before purchase to avoid ordering an incompatible card.