Phone orders: 0714 847183
English
You can use WPML or Polylang and their language switchers in this area.
Menu

Security And IT

0714847183 patsecsolutions@gmail.com
3 KSh 112,350.00

Cart

Subtotal: KSh 112,350.00

View cartCheckout

Previous product Next product
C-TEC CFP 4 zone conventional fire alarm panel
C-TEC CFP 4 zone conventional fire alarm panel - Image 2
C-TEC CFP 4 zone conventional fire alarm panel - Image 3

C-TEC CFP 4 zone conventional fire alarm panel

KSh 32,000.00

C-TEC CFP 4 zone conventional fire alarm panel offers an array of features, it includes four detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad / key switch entry.

CFP 4 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault-finding facilities are also provided.

Buy On Whatsapp
SKU: Ctec4 Category:

Description

C-TEC CFP 4 zone conventional fire alarm panel Specifications:-

Approvals/certifications Certifed to EN54-2 & 4 by the LPCB, Certified to EN54-13 by Kiwa Telefication
Mains supply 230V 50/60Hz.
Mains rated current 350mA maximum.
Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to 1.5A @ 230Vac (ImaxA eq 146mA).
Quiescent current 25mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Max battery size and type 2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.
No. of detector zone circuits 4 (Max. length per circuit is 500m).
Call point resistor value 470 to 680Ω.
Max. devices per detector zone 25 detectors (or 32 detectors/manual call points combined).
No. of conventional sounder circuits 4 (Max. length per circuit is 500m).
EOL resistor value 6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Alarm voltage 27V max, 20V min (final battery voltage)
Max. sounder output current 4 x 200mA (800mA total).
Auxiliary relays Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Open collector outputs Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit volt
Other outputs 24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).
Auxiliary inputs Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)
Engineer (AL3) functions Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound)
Expansion connections Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.
Product dimensions (mm) 380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).
Construction & finish Plastic lid and base; RAL7035 textured
IP Rating IP30.
Weight 1.75kg (without batteries)
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.

Related products

Our Newsletter

Receive a 30% discount on your first offer

    Close Menu