Cart
-
×
Sherlotronics Panic Button Remote PTX1 1 × KSh 2,000.00
Subtotal: KSh 2,000.00
KSh 5,000.00
Sherlotronics wireless panic alarm kit with one receiver and two portable emergency buttons for compatible sirens and alarm panels.
The current price is KSh 5,000. This Sherlotronics wireless panic kit provides remote emergency activation for a compatible siren, security alarm panel or other connected warning device.
The product consists of a wireless receiver and two portable panic-button remotes as shown. A siren, alarm panel, power supply, backup battery and installation cable are not listed as part of this kit.
Pressing either remote panic button sends a coded wireless signal to the receiver. The receiver changes the state of its single-pole normally open or normally closed relay, allowing a compatible alarm panel, siren circuit or monitoring input to activate. The kit does not support PSTN telephone-line communication.
The external antenna supports long-range wireless operation. Actual coverage depends on the receiver model, building materials, interference and antenna position. Install the receiver in a raised, central location and test every remote from the farthest intended operating point before relying on the system.
The portable panic remotes can be assigned to users at homes, shops, offices, reception desks, cash-handling points and other premises where staff may need to trigger an alert quickly. The chain allows each remote to be carried or kept within easy reach.
The receiver accepts 12–24V DC or 9–22V AC power. Its single-pole relay provides normally open and normally closed contacts with a stated switching capacity of 5A DC. Connect the relay to a compatible alarm input or properly designed siren circuit; use an additional correctly rated relay where the connected load exceeds the receiver output.
The panic buttons are portable, but they are not stand-alone personal alarms and do not produce a warning sound by themselves. Each remote must remain within working range of the installed receiver, which must be connected to a siren, alarm panel or other response device.
The system can be used to request assistance or trigger a local warning during a security incident, medical emergency or other distress situation. The response depends on what is connected to the receiver. It does not automatically contact police, a monitoring company or telephone numbers unless a separate compatible communication system is installed.
Install the receiver indoors in a secure position, connect a compatible power source and wire the relay output to the selected alarm device. Pair or code the remotes according to the receiver instructions, then test each button from all required locations. Repeat the test regularly and replace remote batteries when transmission becomes unreliable.
The kit can provide a discreet remote trigger at reception desks, cash offices and selected staff areas. Test the wireless signal from every intended location and connect the receiver to a clear response such as a siren or compatible alarm-panel input.
Total installation cost depends on the number of buttons, cable distance, power and backup requirements, siren choice and whether the receiver connects to an existing alarm panel. Request a site-specific quotation.
Buy the Sherlotronics wireless panic alarm system from Patsec Security Store at Accra Road, White Angle House, first floor, shop 76, Nairobi. Same-day delivery is available within Nairobi. Contact the store to confirm availability and installation requirements.