The current Centurion FLUX inductive loop detector price is KSh 12,000. Confirm whether the ground-loop cable and installation work are included before ordering.<\/p>\n
An inductive loop detector identifies a vehicle by monitoring changes in the magnetic field around a cable loop installed in the road surface. The FLUX unit sends an output to a compatible gate motor, traffic barrier or access-control system when a vehicle is present.<\/p>\n
The detector can trigger a sliding or swing gate for free exit when a vehicle drives over the installed loop. It can also provide vehicle-presence information to a managed entrance or parking system.<\/p>\n
At a traffic barrier, an inductive loop can help prevent the boom from closing while a vehicle remains in the detection area. A separate free-exit loop can command the barrier to open for vehicles leaving the property.<\/p>\n
The detector module and the road loop are separate parts of the system. The module processes the signal, while insulated loop cable installed in the pavement creates the sensing area. Lead-in cable, conduit, sealant and installation work may also be required.<\/p>\n
The loop cable is normally installed in a correctly sized groove cut into the road surface near the gate or barrier. Its position depends on whether the loop is being used for safety, vehicle presence or free exit.<\/p>\n
The FLUX detector can be used with compatible Centurion gate motors, traffic barriers and access-control inputs. Confirm the controller input, power requirements and desired operating mode before installation.<\/p>\n
A vehicle\u2019s metal mass changes the electrical characteristics of the buried loop. The detector recognises this change and switches its output. Detection depends on the loop layout, sensitivity setting, vehicle position, cable condition and nearby metal structures.<\/p>\n
Installation should be completed by an access-control technician. The loop must be cut, wired, sealed and connected correctly, then tested with the types of vehicles that use the entrance. Safety functions should be checked before normal operation.<\/p>\n
Unreliable detection can result from a damaged loop cable, moisture in joints, incorrect sensitivity, loose connections, electrical interference or an unsuitable loop layout. Test the loop and wiring before replacing the detector module.<\/p>\n
Buy the Centurion FLUX inductive loop detector from Patsec Security Store at Accra Road, White Angle House, first floor, shop 76, Nairobi. Contact the store with the gate or barrier model and required use so the correct installation parts can be confirmed.<\/p>\n","protected":false},"excerpt":{"rendered":"
Centurion FLUX inductive loop detector for vehicle detection at automatic gates and traffic barriers.<\/p>\n